Commercial Electrical Panel Upgrades & Installation in Dallas–Fort Worth
LICENSED COMMERCIAL PANEL & SERVICE-UPGRADE ELECTRICIANS — TECL #18170
When your business outgrows its electrical service, C & F Electrical upgrades it safely and to code. From panel replacements and service-entrance upgrades to smart breaker systems and hazard-panel swap-outs, our family-owned team has powered Dallas–Fort Worth commercial properties since 1977.
Family-Owned Since 1977 | Licensed & Insured | Texas Electrical Contractor License TECL #18170 | Based in Royse City, TX — Serving All of Dallas–Fort Worth
Commercial Panel Upgrades & Service Entrance Replacement for DFW Businesses
Your electrical panel is the heart of your building’s power system — and an undersized or aging panel is both a safety risk and a bottleneck for growth. C & F Electrical designs and installs commercial panel upgrades, service-entrance replacements, sub-panels, and smart breaker systems for offices, retail, restaurants, medical facilities, warehouses, and multi-tenant buildings across the DFW metroplex. Every job is load-calculated, fully permitted, and inspection-ready.
Our Commercial Electrical Panel Services
Every panel upgrade is performed by licensed electricians, fully permitted, inspected, and load-tested with documented results.
- Commercial panel replacement & service-entrance upgrades
- Amperage increases — 200A, 400A, 800A, 1200A and above
- Main breaker, sub-panel & distribution board installation
- Smart breaker panels with real-time load monitoring
- Federal Pacific, Zinsco & Pushmatic hazard-panel replacement
- Meter stacks & multi-tenant / multi-meter panel upgrades
- Code-compliant work — permitted, inspected & load-tested
Signs Your Commercial Panel Needs Upgrading
Most older DFW commercial buildings were built around 100–200 amp service, while today’s offices, restaurants, and light-industrial tenants routinely need 400 amps or more. Watch for breakers that trip under normal load, a panel that’s warm to the touch, scorch marks or a burning smell, flickering lights, or fuses instead of breakers. Federal Pacific Stab-Lok, Zinsco, Sylvania-Zinsco, and Pushmatic panels are known to fail during an overload and should be replaced on sight — they’re a documented fire hazard. If your panel is over 25 years old, or you’re adding EV charging, HVAC, or new equipment, it’s time for an upgrade.
Dallas / Fort Worth Counties and Surrounding Areas We Proudly Service
- Dallas County
- Tarrant County
- Collin County
- Denton County
- Rockwall County
- Kaufman County
- Ellis County
- Johnson County
- Parker County
- Wise County
- Hunt County
- Hood County
- Somervell County
- and more…
Commercial Panel Upgrades Across Dallas–Fort Worth
C & F Electrical is based in Royse City, Texas and upgrades commercial panels throughout Dallas, Fort Worth, Plano, Frisco, McKinney, Garland, Irving, Arlington, Rockwall County, and the surrounding DFW cities. Our service area covers Dallas, Tarrant, Collin, Denton, Rockwall, Kaufman, Ellis, Johnson, Parker, Wise, Hunt, Hood, and Somervell counties. Because we’ve worked these jurisdictions since 1977, we know each city’s permit desk and inspection requirements — so your panel upgrade passes the first time.
Why DFW Businesses Choose C & F Electrical
- Family-owned and serving Dallas–Fort Worth since 1977
- Texas Electrical Contractor License TECL #18170 — licensed and insured
- Complete design-build capability: load analysis, panels, and utility coordination under one roof
- Established relationships with permitting offices and inspectors across DFW
- Free consultations and detailed written quotes — no surprises
Get a Free Commercial Panel Upgrade Quote in Dallas–Fort Worth
Call (972) 771-1131 Monday–Friday, 7:00am–5:00pm, or request service online. We’ll perform a load analysis and deliver a detailed written quote for your commercial panel upgrade.
Looking For Some Answers?
Commercial Electrical Panel Upgrade — Frequently Asked Questions
How much does a commercial electrical panel upgrade cost in Dallas–Fort Worth?
Most commercial panel upgrades in DFW range from about $1,500 to $5,000 for a straightforward replacement, while larger service-entrance upgrades — higher amperage, utility coordination, or multi-tenant meter stacks — commonly run $5,000 to $30,000 or more. Final cost depends on amperage, panel type, and whether the utility service needs upsizing. C & F Electrical provides a free load analysis and a detailed written quote. Call (972) 771-1131.
What are the signs my commercial electrical panel needs upgrading?
Common signs include breakers that trip under normal load, a panel that is warm to the touch, scorch marks or a burning smell, flickering lights, and fuses instead of breakers. Federal Pacific, Zinsco, and Pushmatic panels should be replaced on sight because they can fail during an overload. If you are adding equipment, EV charging, or HVAC capacity, an upgrade is usually required.
How much amperage does my commercial building need?
Most older commercial buildings were built around 100–200 amp service, but modern offices, restaurants, and light-industrial spaces often need 400 amps or more. The correct size comes from a load calculation of your actual and planned equipment — HVAC, refrigeration, IT, lighting, and any EV charging. C & F Electrical performs a load analysis with every commercial panel quote so you upgrade once, with headroom for growth.
Do I need a permit to upgrade a commercial electrical panel in DFW?
Yes. Commercial panel and service-entrance upgrades require an electrical permit and inspection, and service upgrades usually require utility (Oncor) coordination and a temporary disconnect. C & F Electrical pulls the permits, schedules the inspection, and coordinates with the utility. Having worked across the DFW metroplex since 1977, we know each city’s requirements — including Dallas, Fort Worth, Rockwall, and Royse City.
How long does a commercial panel upgrade take?
A straightforward commercial panel replacement is often completed in a single day once the permit is approved. Full service-entrance upgrades that require utility coordination, new meter equipment, or increased amperage typically take one to several weeks, and we can phase the work or use temporary power to keep your business running. We provide a project timeline with every quote.
Should I replace my Federal Pacific, Zinsco, or Pushmatic panel?
Yes. Federal Pacific Stab-Lok, Zinsco, Sylvania-Zinsco, and Pushmatic panels are known to fail to trip during an overload, turning a minor fault into a fire hazard, and many insurers now flag them. If your commercial property still has one of these panels, C & F Electrical recommends prompt replacement with a modern, code-compliant panel. We can inspect your panel and provide a written recommendation.
What Our Clients Say About Us