Ground Up Electrical Construction Across North Texas
When “ground up” is in the scope, C & F Electrical is the single-source electrical contractor general contractors and developers across North Texas bid with confidence. From underground utilities and site trenching through switchgear, build-out, and final commissioning, our family-owned team has delivered expert commercial electrical services from Rockwall and Royse City to Garland, Plano, McKinney, Greenville, and the entire Dallas–Fort Worth area since 1977. One team, one schedule, zero finger-pointing.
Commercial Ground Up Electrical Construction for North Texas General Contractors, Developers, and Owners
North Texas is one of the fastest-growing commercial construction markets in the country, and every new building starts the same way: dirt, a set of plans, and a schedule that can’t slip. C & F Electrical provides complete ground up electrical construction that general contractors, developers, and owner-builders from Dallas and Fort Worth to Rockwall, Rowlett, Wylie, and Greenville rely on to keep new commercial projects moving — accurate bids, coordinated drawings, and crews that show up when the schedule says they will.
As an experienced commercial electrical contractor, our ground up electrical construction crews take new builds from first scoop to final switch-on: site utilities and trenching, temporary construction power, underground and slab rough-in, service entrances and switchgear, interior build-out, lighting and controls, life-safety systems, and documented final commissioning. Every project is fully permitted, inspected, and closed out with the paperwork your inspector — and your client — expects.
Our Ground Up Electrical Construction Services in North Texas
Every phase of ground up electrical construction, handled by licensed electricians under one contract.
- Site electrical utilities, trenching, and underground conduit
- Temporary construction power setup and maintenance
- Underground and slab electrical rough-in before pour
- Service entrances, switchgear, panels, and power distribution
- Feeders, branch circuits, and equipment connections
- Interior electrical build-out and wall/ceiling rough-in
- Commercial lighting, LED systems, and lighting controls
- Life-safety and emergency power: egress lighting and exit systems
- Low-voltage pathways and fire alarm conduit coordination
- Provisions for future commercial generators and EV charging stations
- Utility coordination (Oncor and other North Texas providers) and permanent power release
- Testing, final commissioning, punch list, and closeout documentation
How Ground Up Electrical Construction Works — Phase by Phase
1 — Pre-Construction & Budgeting
Plan review, detailed bid, long-lead gear flagged early (switchgear can run months out), and coordination with your GC before dirt moves.
2 — Site & Underground
Trenching, underground conduit, site utilities, and slab rough-in — placed and inspected before concrete is poured.
3 — Rough-In
Conduit, boxes, and wiring through walls and ceilings once framing is up, coordinated with mechanical and plumbing trades.
4 — Trim & Finish
Devices, fixtures, labeled panels, lighting and controls, and equipment connections as the building comes together.
5 — Commissioning & Closeout
Load testing, life-safety verification, final inspections, utility release, and documented handoff — first scoop to final switch-on.
Ground Up Electrical Construction for New Commercial Builds Across North Texas
Retail & Restaurant
Strip centers, pad sites, standalone retail, and restaurants — including kitchen equipment power, signage circuits, and parking lot lighting.
Office & Medical
Office buildings and medical facilities with the clean power, data pathways, and life-safety systems modern tenants and code require.
Industrial & Warehouse
Tilt-wall warehouses, distribution centers, and light industrial — high-bay lighting, three-phase distribution, and dock equipment power.
Recent Ground Up Electrical Construction Projects by C & F Electrical
See our work: Latest completed projects
Why New Construction Electrical Experience Matters in North Texas
Ground up electrical construction isn’t just wiring — it’s coordination. Every community across North Texas, from Dallas and Fort Worth to Rockwall, Royse City, Rowlett, Greenville, McKinney, and Forney, runs its own review and inspection process, and every new building depends on the local utility for service design and permanent power. Since 1977, C & F Electrical has built working relationships throughout the region, so your electrical scope keeps pace with the rest of the schedule instead of holding it up.
We also plan every ground up electrical construction project with Texas realities in mind: long summers and heavy grid demand, storm-season backup power provisions, and the extra capacity growing tenants ask for down the road. Whether your project is a pad site in a fast-growing suburb or a warehouse on the edge of the metroplex, you get the same family-owned crew, the same single point of accountability, and the same attention to detail on every job.
Dallas / Fort Worth Counties and Surrounding Areas We Proudly Service
- Dallas County
- Tarrant County
- Collin County
- Denton County
- Rockwall County
- Kaufman County
- Ellis County
- Johnson County
- Parker County
- Wise County
- Hunt County
- Hood County
- Somervell County
- and more…
Why North Texas Builders Choose C & F Electrical for Ground Up Projects
- Family-owned and serving North Texas since 1977
- Texas Electrical Contractor License TECL #18170 — licensed and insured
- Single-source accountability for ground up electrical construction, from trenching to commissioning — no finger-pointing between subs
- Design-build capability: drawings, value engineering, and installation under one roof
- Established relationships with cities, inspectors, and utilities across North Texas
- Free consultations and detailed written bids — no surprises
Get a Ground Up Electrical Construction Bid for Your North Texas Project
Call (972) 771-1131 Monday–Friday, 7:00am–5:00pm, email estimating@candfelectrical.com, or request service online. Send us your plans and we’ll deliver a detailed written bid for your ground up electrical construction project.
Looking For Some Answers?
Ground Up Electrical Construction — Frequently Asked Questions
How much does ground up electrical construction cost in North Texas?
Commercial electrical typically runs a meaningful share of total construction cost, and across North Texas it commonly lands in the range of roughly $8–$20+ per square foot depending on building type — a shell retail space sits at the low end, while medical and food-service builds with heavy equipment loads run higher. Switchgear lead times and utility work also affect cost. C & F Electrical provides detailed written bids from your plans. Call (972) 771-1131 or email estimating@candfelectrical.com.
When should the electrical contractor get involved in a new commercial build?
Before ground breaks. Switchgear and transformers can take months to arrive, and utility coordination with the local utility starts early. Bringing C & F Electrical in during pre-construction lets us lock in long-lead equipment, coordinate underground work with your site schedule, and value-engineer the design before changes get expensive. We also offer design-build services if your drawings aren’t complete.
What does "ground up" electrical construction include?
Everything from dirt to done: site trenching and underground conduit, temporary construction power, slab rough-in, service entrances and switchgear, panels and power distribution, interior build-out, commercial lighting and controls, life-safety and egress systems, low-voltage pathways, testing, and final commissioning. One contract, one team, from first scoop to final switch-on.
Do you handle permits, inspections, and utility coordination for new builds in North Texas?
Yes. C & F Electrical pulls electrical permits, schedules and attends inspections, and coordinates directly with Oncor and other North Texas utilities for service design, transformer placement, and permanent power release. Having worked across North Texas since 1977, we know the permitting offices and inspection teams in Dallas, Fort Worth, Rockwall, Royse City, Rowlett, Greenville, and the surrounding communities.
How long does the electrical scope take on a ground up commercial project?
Electrical work spans nearly the entire construction schedule — underground work in the first weeks, rough-in during framing, and trim through final inspection at the end. For a typical North Texas commercial build, plan on electrical activity across several months, with switchgear lead time (often 8–30+ weeks) as the single biggest schedule risk. We flag long-lead items in every bid and provide a phased timeline.
Can you rough in EV charging and generator provisions during construction?
Yes — and it’s the cheapest time to do it. Running conduit, sizing panels, and reserving capacity for future EV charging stations or a standby generator during construction costs a fraction of retrofitting later. We regularly design new builds with generator pads, transfer-switch provisions, and EV-ready parking infrastructure so owners can add equipment without trenching twice.
What Our Clients Say About Us